Paxton Net2 plus Installation Manual download pdf (Page 5)

Page

Intruder alarm integration

A dedicated port for input and output signals is provided when integrating a Net2 plus ACU with an alarm system.

Please see AN1035 - Integrating Net2 with an intruder alarm system < http://paxton.info/91 > or call Technical

Support for further information.

Arm - Conrmation Push Button - Wire across 0V and Arm.

Sense - Requires a voltage free loop across 0V and Sense to conrm when alarm is active.

Set - Relay provides contacts across COM and N.O. for a voltage free loop to set the alarm.

Reader 1: Settings for Reader 1 and Keypad 1 on the ACU.

Reader 2: Settings for Reader 2 and Keypad 2 on the ACU.

Alarm: Contains settings for the different types of alarm.

Codes: Valid codes can be viewed, added and removed.

(Can only be viewed when a keypad is active).

Events: Shows the events for the control unit selected.

Name: Each reader can be named individually if required.

Reader type: Set the reader type, if applicable.

Keypad type: Set the keypad type, if applicable.

Token data format: Select the data type being used on

the system. (New formats can be created).

Reader operating mode: Set the operating mode.

Timed operating modes: A different operating

mode can be congured within a time window.

Reader action: Set the action required

when access is granted.

Software Conguration

Door name: Name the Door.

Door open time: Set the door open time.

Unlock the Door during: Holds the door unlocked during

this timezone. - Set to 'At No Time' for normal user

operation.

PC Installation

The current specication for compatible PC hardware, network and operating systems is available on our website at

the following link: http://paxton.info/720

1 2 3 4 5 6 7 8

No comments

Paxton Net2 plus Installation Manual Page 5