Paxton Net2 PaxLock Specifications download pdf (Page 3)

Page 3

Step 9 - Fitting the rear cover

Present the front lock assembly to the door passing

the wiring harness through the 16 mm hole.

Present the rear lock assembly to the door and join

the two parts together with the two mounting screws.

Step 5 - Mounting on the door

Step 6 - Wiring

Plug the wiring harness into the socket in the rear

lock assembly.

Locate the top of the cover over the housing and push

ush to the door.

Clip in the 4 x AA Alkaline batteries with reference to

the label displayed below the holder assembly.

Step 8 - Fitting the batteries

Where a contact switch is tted, connect the wires to

the terminal block provided on the pcb.

Step 7 - Wiring (contact switch option)

Mounting screws are provided in three lengths.

Short - Door width 35 mm to 45 mm

Med - Door width 40 mm to 50 mm

Long - Door width 45 mm to 60 mm

1 2 3 4 5 6 7

No comments

Paxton Net2 PaxLock Specifications Page 3